Chai xịt vệ sinh cổ hút họng ga, tẩy trắng đầu bò xe Wurth Air Intake And Throttle Valve Cleaner 500ml
Chai vệ sinh họng ga 500ml Wurth dùng tẩy vệ sing họng hút, bướm ga, van dùng cho ô tô xe máy.
Cải thiện hiệu suất động cơ , cải thiện nhiên liệu, xử lý khi xe bị òa ga, lâu này nhiều muội than bám quay họng ga.
Một ứng dụng rất hay là Tẩy sạch làm mới cả đầu bò xe máy.
Quy cách: 500ml
Xuất xứ: Wurth
- Contents: 500 ml
- Colour: Colourless
- Smell/fragrance: Solvent-like
- Chemical basis: Hydrocarbon
- Shelf life from production: 24 Month
- Density: 0.86 g/cm³
- Density conditions: at 20°C
Possible to clean without removing components
Special highly active system cleaner for 2 and 4 stroke engines.
Overhead valve
Hard-to-reach areas can be easily accessed
Excellent cleaning performance
- Optimum carburettor performance
- Perfect throttle valve function
Quiet engine running
Faults caused by dirty throttle valves or carburettors are rectified.
Removes deposits and soiling in the intake and throttle valve area without dismantling work is necessary.
Can be used for cleaning calibrated bores and nozzles.
Improves fuel flow.
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Removes deposits and impurities in the intake and throttle valve area. Calibrated drill holes and nozzles can also be cleaned with this process. Suitable for catalytic converters.
When the engine is turned off, generously spray all parts to be cleaned and allow the active agent to react for 2–3 minutes.
Then, with the engine running for approx.
30 seconds, spray into the intake and throttle valve area, while slightly increasing the speed to loosen the deposits.
Contents | 500 ml |
Colour | Colourless |
Smell/fragrance | Solvent-like |
Chemical basis | Hydrocarbon |
Shelf life from production | 24 Month |
Density | 0.86 g/cm³ |
Density conditions | at 20°C |
Product information
Würth Catalogue (0)
Datasheets (1)
Certificates/Documents (1)